Item number:	p463000
Reference	Nominal capacity (ML)	Filing capacity (ML)	Brimful capacity (ML)	Ring finish (g)	Height  (MM)	Diameter  (MM)	Scrow finish
463008	300ml	300	330	216	126.5	68.2	G.P.I400-45/53
464009	400ml	400	440	225	136.5	74.7	G.P.I400-45/53
465010	500ml	500	550	270	147	81	G.P.I400-45/53

Lead time:	35days
Comments:	Free samples within 7days
	Accept OEM glass bottle
	use for Pharmaceutical Capsule Medical Pill

What are the requirements of glass bottles for silk screen printing

1. Generally, it is used as the processing procedure of graphic label for packaging products, which has an important influence on the image of the product, so it has higher technical requirements.

2. Glass bottle screen printing: For screen printing on blank transparent or frosted or sprayed bottles, high temperature inks should be used, and they will be baked at high temperature after coloring. They will not fade and are not easy to scratch. The color is relatively heavy, so choose a high temperature furnace. Most manufacturers carry out silk screen printing, and the printing quantity is generally more than 5,000, and the charge is based on the style/color.

3.In the design, no more than 2 colors should be considered. Negative films should be produced when the film is produced. The characters, patterns and lines should not be too thin or too large, which may cause broken lines or ink accumulation. Proof should be confirmed before mass production. There is a color difference.

4. If the frosted glass bottle is misprinted, it can be reprinted after the grinding process.

5. The same color printing of round bottles is counted as one color, and the calculation basis for flat or oval bottles is based on the number of printing surfaces and the number of printing colors on the printing surface.

6. The screen printing of glass bottles and plastic bottles requires a printing fee. If it is a new specification packaging bottle and the screen printing factory does not have the corresponding fixture, it will charge a fixture fee, but this fee can be deducted by doing a certain amount of silk screen printing.

7. Plastic containers, divided into ordinary ink and UV ink screen printing. UV ink is widely used. The characters and pictures have a three-dimensional effect, are brighter, are not easy to fade, can be printed with multi-color effects, and the print volume is generally more than 1000

8. Proof before batch screen printing, and produce after confirming the effect of graphic screen printing. After confirmation, the production adjustment cycle is 4-5 days, depending on the screen printing difficulty and quantity.

9. Usually the silk screen factory has hot stamping, hot silver and other processing techniques. The screen printing methods include manual, mechanical screen printing, pad printing and sticker pad printing.

10. When producing and using silk-screened bottles, care should be taken to avoid excessive handling or collisions, to avoid the effect of grinding silk-screen printing, and to choose a reasonable disinfection method during production.

11. The lowest cost of silk screen printing is 0.08 yuan/color, but special attention should be paid to the failure of the expected design effect due to poor silk screen printing, and the entire batch of containers may be scrapped. The silk screen can be printed according to the percentage of spot color to achieve rich colors.

 

amber glass bottle for tablet wide mouth G.P.I 400
Item number:	p460000
Reference	Nominal capacity (ML)	Filing capacity (ML)	Brimful capacity (ML)	Ring finish (g)	Height  (MM)	Diameter  (MM)	Scrow finish
460601	60ml	60	69	73	75.5	44.5	G.P.I400-33
460752	75ml	75	86	82	82.5	45.3	G.P.I400-38
461003	100ml	100	114	92	87.5	50.0	G.P.I400-38
141204	120ml	120	135	110	95	52.8	G.P.I400-38
451505	150ml	150	170	122	100	56.0	G.P.I400-45
462006	200ml	200	226	145	109.5	61.4	G.P.I400-45
462007	250ml	250	274	170	117.5	65.3	G.P.I400-45
465010	500ml	500	500	270	147	81	G.P.I 400-45/53

Lead time:	35days
Comments:	Free samples within 7days
	Accept OEM glass bottle
	use for Pharmaceutical Capsule Medical Pill

 

Lead time:	35days
Comments:	Free samples within 7days
	Accept OEM glass bottle
	use for essential oil

SPECIFICIATION:
Item number:	p610000			name:	borosilicate glass bottle
Reference	Nominal capacity (ML)	Filing capacity (ML)	Brimful capacity (ML)	Ring finish  (g)	Height  (MM)	Diameter  (MM)	Scrow finish
610021	2ml	2	4.2	4.6	35	15.8	ISO13
610071	7ml	7	10.5	8.2	39.7	22	CFDA
610081	8ml	8	11.5	9.4	45	22	ISO20
610102	10ml	10	13.5	10.2	45	24	ISO20
610121	12ml	12	15.5	11.6	52	26.5	CFDA
610151	15ml	15	18.5	13.5	53	24	ISO20
610201	20ml	20	23.5	15	58	27.6	CFDA
610251	25ml	25	32.5	16.5	65	30	CFDA
610301	30ml	30	33.5	21.5	60	29.5	ISO20
Lead time:	35days
Comments:	Free samples within 7days,
	Accept OEM glass bottle
	use for injectlon Bottle

SPECIFICIATION:
Item number:	p410000			name:	amber bottle
Reference	Nominal capacity (ML)	Filing capacity (ML)	Brimful capacity (ML)	Ring finish  (g)	Height  (MM)	Diameter  (MM)	Scrow finish
410081	8ml	8	10	16	46.8	23.0	ISO/CFDA
410101	10ml	10	15	21	53.5	25.4	ISO/CFDA
410201	20ml	20	26	29	58.0	32.0	ISO/CFDA
410301	30ml	30	38	35	62.8	36.0	ISO/CFDA
410501	50ml	50	60	50	73.0	42.5	ISO/CFDA
411001	100ml	100	119	89	94.5	51.6	ISO/CFDA
Lead time:	35days
Comments:	Free samples within 7days,
	Accept OEM glass bottle
	moulded injection vials for antibiotics